Fill Out Your Peco Service And Meter Application Form
The Peco Service and Meter Application form is a crucial tool for customers seeking electric service from PECO. It guides users through a structured process to ensure that all necessary information is provided effectively. The application includes sections for the customer's name, service location, and necessary identification numbers, such as a driver's license or Social Security number. Important details regarding the service type—whether new, temporary, or an upgrade—must be clearly marked. Additionally, applicants must specify the construction status, service requirements, and any electrical load characteristics that influence service provision. Special attention is given to fields concerning the contractor or electrician involved, highlighting their tax identification number and the desired response date. Completeness is key, as missing information can lead to delays in processing. To facilitate the smooth start of electrical work, applicants are encouraged to check regional availability and adhere to PECO's Electric Service Requirements. The application must be signed and dated, cementing the commitment to comply with all guidelines and inspections while respecting any pertinent local regulations.
Peco Service And Meter Application Example
INSTRUCTIONS FOR PREPARING APPLICATIONS FOR ELECTRIC SERVICE & METER
Please refer to the sample application while reviewing the following notes. The letters below correspond with those on the sample. NOTE: THE "BLANK" FORM IS BELOW THE "SAMPLE" FORM
A.After reading the instructions at the top of the application, locate the PECO regional office in which the service is requested. Check the appropriate box and mail or fax the completed application to the appropriate regional office.
B.Complete the fields for customer's name and service location. Customer's Driver's License Number or Social Security Number is now required.
Note: (*) Include PECO Energy pole # and/or Lot # only if applicable.
(**) Use the address of the service when applying for underwriter's inspection.
C.Complete the fields for customer's PECO billing address or account number (within last 60 days).
D.Complete fields regarding you as the electrician or contractor, and indicate where you would like the reply sent. The Electrician/Builder Tax Identification number is now required. Also, please include the date you would like the reply returned to you.
E.Indicate your current construction status, and include the date PECO service is requested. Please avoid using "as soon as possible".
F. thru J. Indicate the following:
•Type of Request
•Type of Service (include number of units and area per unit)
•Service Characteristics
•Meter Information
•Heating/Air Conditioning
K.Complete the table concerning the load characteristics of the service. For each applicable type of load, provide: 1) Connected KW, 2) Maximum Summer KW Demand, and 3) Maximum Winter KW Demand.
L.Complete the table concerning motor information.
M.If compensated metering will be used, indicate totalizer and general load (KW).
N.Include any additional comments.
O. |
Application MUST be signed and dated. |
Forms Rev. 5/18 |
PECO
Application for Electric Service & Meter
INSTRUCTIONS:
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL
NEW BUSINESS SERVICES
PHILADELPHIA |
|
|
|
DELAWARE & CHESTER COUNTIES |
BUCKS & MONTGOMERY |
|
|
|
|
|
|
|
NEW RESIDENTIAL |
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||
COUNTY |
|
|
|
1050 W. Swedesford Rd. |
COUNTIES |
|
|
|
|
|
|
|
|
|
CONSTRUCTION |
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
||||||||||||||||||||||||||||||||||||||||
830 S. Schuylkill Ave. |
Berwyn, PA 19312 |
|
|
|
|
400 Park Ave. |
|
|
|
|
|
|
|
|
|
(All Counties) |
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||
Philadelphia, PA 19146 |
Email:DelChesterServiceApplications@ex |
Warminster, PA 18974 |
|
|
|
|
|
|
|
|
|
400 Park Ave. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||
Email:PhilaNewBusiness@e |
eloncorp.com |
|
|
|
|
|
|
|
Email:Bucksmontserviceapplications@e |
Warminster, PA |
18974 |
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||
xeloncorp.com |
|
|
|
Fax # (610) |
|
|
|
|
xeloncorp.com |
|
|
|
|
|
|
|
|
|
Email:NRCGMETERORDERS@P |
|||||||||||||||||||||||||||||||||||||
Fax # (215) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fax # (215) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fax # (215) |
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CUSTOMER NAME |
|
|
|
|
|
|
|
|
|
|
|
|
Tax ID # or SSN |
|
|
TYPE OF REQUEST |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
New Service |
|
|
Load Increase/Decrease |
|
Reintroduction of Service |
|||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temporary Service |
Upgrade/Changes |
|
Demolition (Remove |
|
|
|
||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Separation of Wiring |
Service Relocation |
|
|
|
Service) |
|
|
|
|
|
|
|||||||||||||||||||||||
** ADDRESS TO BE SERVED |
|
|
B |
|
|
|
|
|
APARTMENT/LOT # |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F |
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
energize/Cover) |
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CITY, STATE |
|
|
|
|
|
|
|
|
|
|
|
|
ZIP CODE |
|
|
|
|
|
|
TYPE OF SERVICE: Please include site plan. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESIDENTIAL |
|
|
|
|
|
|
|
|
|
|
|
|
COMMERICAL |
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single House |
Mobile Home |
Store |
|
|
|
|
Office |
|
|
|
G |
|
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Apartment |
Modular Home |
Industrial |
|
|
|
|
Warehouse |
|
|
|
||||||||||||||||||||||||
UTILITY POLE# |
SUBDIVISION/DEVELOPMENT |
|
|
TOWNSHIP/MUNICIPALITY/WARD# |
|
Duplex |
Town House |
Restaurant |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other _____________________________ |
Other _____________________________ |
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Area of Building _______________________ Sq. Ft. |
|
|
|
|
|
|
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* If Applicable |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SERVICE CHARACTERISTICS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
** Please use this address when applying for underwriter’s inspection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHASE |
|
VOLTS |
|
|
|
WIRES |
|||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Underground |
|
|
Aerial |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
CUSTOMERS BILLING ADDRESS |
|
C |
|
|
|
|
PECO ENERGY ACCOUNT# |
|
|
|
|
|
|
|
|
|
|
3 |
|
|
240 |
|
|
|
3 |
|
|
|
|
|||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMPS _________ |
|
|
|
|
|
3 |
|
|
120/240 |
|
|
|
4 |
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHASE |
|
VOLTS |
|
WIRES |
|
|
|
|
|
|
|
3 |
|
|
120/208 |
|
|
|
4 |
|
|
|
|
|||||||||
CITY, STATE |
|
|
ZIP CODE |
|
|
|
|
|
TELE. # |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
120 |
|
|
2 |
|
|
|
|
|
|
|
|
3 |
|
|
277/480 |
|
|
|
4 |
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
120/240 |
|
3 |
|
|
|
|
|
|
|
|
3 |
|
|
13200 |
|
|
|
3 or 4 |
||||||||||||
SEND REPLY TO: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
120/240 |
|
5 |
|
|
|
|
|
|
|
|
3 |
|
|
33000 |
|
|
|
3 or 4 |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
ELECTRICIAN’S OR BUILDER’S NAME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
METER INFO: |
Two Meters, Commercial (General/Totalizer) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
I |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single Meter Required |
|
|
|
|
|
|
|
Multiple Meter Total No. _____________ |
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ADDRESS |
|
|
|
|
|
|
|
|
|
|
Reply Requested by: |
|
|
HEATING/AIR CONDITIONING: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
D |
|
|
|
|
|
|
/ |
/ |
|
|
|
Central Air _____ Tons |
|
Resistance |
|
|
|
J |
|
Heat Pump _____ Tons |
|
|
|
|||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
Natural Gas |
|
|
|
Propane |
|
|
|
|
|
Type |
|||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other ________________ |
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
City, State |
|
|
|
|
|
|
|
|
|
|
ZIP CODE |
|
|
|
|
|
|
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONNECTED |
|
PECO ENERGY USE ONLY (DEMAND) |
|
||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TYPE |
|
LOAD (kW) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
TELE. # |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SUMMER (kW) |
|
|
|
Winter (kW) |
|
|||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LIGHTING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
CURRENT CONSUTRCTION STATUS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HEATING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
Not Started – Date Customer Will Start Work: _____/_____/_____ |
In Progress Completed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
|
AIR/COND. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Approximate Date Service Requested: _____/_____/_____ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
E |
|
|
|
TANKLESS WATER HTR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MISC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CUSTOMER COMMENTS/ DESCRIPTIN OF WORK |
|
|
N |
|
|
|
|
|
|
TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Include single line diagram and substation arrangement if appropriate. |
||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LARGEST MOTOR SPECIFICATIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
O |
|
|
|
|
|
|
|
|
|
|
QUANTITY |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TOTALIZER LOAD |
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SIZE (HP) |
|
|
|
|
|
|
|
|
|
|
L |
|
|
|
|
|
|
|
|
M |
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOCKED ROTOR CURRENT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KW |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MOTOR CODE LETTER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
SUBMITTED BY: _________________________________ DATE: ______________________ |
|
PHASE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GENERAL LOAD |
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||
|
VOLTAGE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
PECO
Application for Electric Service & Meter
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
PURPOSE
KW
INFORMATION BELOW WILL BE FILLED IN BY PECO: |
|
|
|
|
|
|
|
|
|
|
|
Service Request No. |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
BUS/MAJ ACCT REP |
|
TELEPHONE |
DATA RECEIVED |
DESIGNER |
|
|
|
|
|
DATA RECEIVED |
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TELEPHONE |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
POL SUB |
|
RATE |
|
RIDER |
|
CONTRACT LIMITS |
|
SIC NUMBER |
|
T |
|
DATE REPLY |
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NUMBER |
|
COMPLETED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
AMPS |
|
WIRES |
|
VOLTAGE |
PHASE |
|
|
CIRCUIT |
|
|
|
|
|
|
LOAD (KVA) |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SUMMER_____WINTER ____ |
|
SERVICE CHARACTERISITICS – Select One from Each |
|
|
|
|
|
|
|
|
|
POLE # / MH # LOCATION |
|
CUT THROUGH DATE |
|||||||||||
SERVICE TYPE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
Aerial |
|
|
|
Underground |
URD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
RATE: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Residential |
|
|
Comm (Non- |
|
Comm (Demand) |
|
HT/PD |
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
Demand) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GENERATION PROCUREMENT CLASS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
Class 1 (Residential) |
|
|
|
Class 2 (Commercial, less than 100kW) |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
Class 3 (Commercial, 100kW to 500kW) |
|
Class 4 (Commercial, greater than 500kW) |
|
|
|
|
|
|
|
|
|
|
|||||||||||
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load |
|
|
|
|
|
|
|||||||||||||||||
estimates for the first year of service. The customer’s Procurement Class will be adjusted each year, |
|
|
|
|
|
|
|||||||||||||||||
based on actual usage. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
METER TYPE: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KWH |
|
|
IND. DEMAND |
RECORDER |
TOU |
|
|
|
|
|
|
|
|
|
|
||||||||
SERVICE PHASING: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
SINGLE PHASE |
TWO PHASE |
THREE PHASE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
SERVICE REQUIREMENTS: |
|
|
|
|
|
|
METERING LOCATION AND REQUIREMENTS: |
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
Present Location: |
Meter # _______________ |
CTs- |
|
||||||||||
Present Service OK |
Loop Only |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
________ |
|
|
|||||
Taps Only |
|
|
See Job # ________________________________ |
|
Indoo |
Outdoor |
|
On ________ Wall, ________ Ft. From ________ Wall, ________ ft. Above |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
r |
|
|
|
|
|
Ground |
|
|
|
||||
ADVANCE NOTIFICATIONS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
CUSTOMER BILLING: |
|
|
|
||||||
Underwriter’s Cert. |
|
Yes |
No |
|
|
|
|
|
|
|
|
|
Advance Billing |
Yes |
|
$_______________ |
|||||||
Required |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Required |
|
|
|
__ |
|||
Customer to Trench |
|
Yes |
No |
|
|
|
|
|
|
|
|
|
|
|
|
No Customer |
|
|
|||||
Permit Required |
|
Yes |
No |
State |
Other |
|
|
|
|
|
|
|
Charges: |
$_______________ |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
__ |
||||||||||||
|
|
|
|
|
|
|
|
_______________________ |
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
Cust. # |
|
|
Date |
|
|
||||||||
ACT 222 Cert. Required |
|
Yes # |
|
|
No |
N/A |
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
_________________________ |
|
___________________________ |
||||||||||||
|
|
|
_____________ |
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
BTCO # |
|
|
Date |
|
|
||||||
PA One Call # |
|
|
|
|
|
|
|
Date |
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
________________________ |
|
___________________________ |
||||||||
___________________________ |
|
|
|
|
__________________________ |
|
|
||||||||||||||||
|
|
|
|
|
CATV # |
|
|
Date |
|
|
|||||||||||||
Gas |
BTCO |
CATV |
Other |
|
Date |
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
________________________ |
|
___________________________ |
||||||||||||||
|
|
|
|
|
___________________ |
__________________________ |
|
|
|||||||||||||||
|
|
|
|
|
|
Other |
|
|
Date |
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
__________________________ |
|
___________________________ |
|||||
SKETCH / INSTRUCTIONS
PECO
Application for Electric Service & Meter
INSTRUCTIONS:
Please complete the front page of this request and return to the PECO Regional Office (listed below) in the area service is required. Incomplete information may result in a delay in processing.
All work must comply with PECO Electric Service Requirements manual and be inspected by an approved inspection agency. (City of Philadelphia requests may be shared with Licenses & Inspections). Not all service voltages are available in all areas. Before purchasing electrical equipment or proceeding with any wiring, information regarding service availability and meter location should be obtained from the company.
A credit application and agreement must be completed if the customer has not had PECO service within the last 60 days. The company reserves the right to cancel this request if no further communication is received from the customer within 90 days of PECO's response date.
NOTE: IF DEMOLISHING A BUILDING AND NEED PECO TO REMOVE ELECTRIC OR GAS FACILITIES, PLEASE CALL
NEW BUSINESS SERVICES
PHILADELPHIA COUNTY |
DELAWARE & CHESTER COUNTIES |
BUCKS & MONTGOMERY |
|
|
|
|
|
NEW RESIDENTIAL |
|
|
|
|||||||||||||||||||||||||
830 S. Schuylkill Ave. |
1050 W. Swedesford Rd. |
|
COUNTIES |
|
|
|
|
|
|
|
|
CONSTRUCTION |
|
|
|
|||||||||||||||||||||
Philadelphia, PA 19146 |
Berwyn, PA 19312 |
|
400 Park Ave. |
|
|
|
|
|
|
|
|
(All Counties) |
|
|
|
|
|
|
||||||||||||||||||
Email:PhilaNewBusiness@ex |
Email:DelChesterServiceApplications@exe |
Warminster, PA 18974 |
|
|
|
|
|
|
400 Park Ave. |
|
|
|
|
|
|
|||||||||||||||||||||
eloncorp.com |
|
|
loncorp.com |
|
|
|
Email:Bucksmontserviceapplications@e |
|
Warminster, PA 18974 |
|
|
|
||||||||||||||||||||||||
Fax # (215) |
Fax # (610) |
|
xeloncorp.com |
|
|
|
|
|
|
|
|
Email:NRCGMETERORDERS@P |
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
Fax # (215) |
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fax # (215) |
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CUSTOMER NAME |
|
|
|
|
Tax ID # or SSN |
|
|
|
TYPE OF REQUEST |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
New Service |
|
|
Load Increase/Decrease |
|
Reintroduction of Service |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Temporary Service |
Upgrade/Changes |
|
Demolition (Remove |
|||||||||||||||||||||
** ADDRESS TO BE SERVED |
|
|
APARTMENT/LOT # |
|
|
|
Separation of Wiring |
Service Relocation |
|
|
Service) |
|
|
|
||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
energize/Cover) |
|
|
|
||||
CITY, STATE |
|
|
|
|
ZIP CODE |
|
|
|
TYPE OF SERVICE: Please include site plan. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RESIDENTIAL |
|
|
|
|
|
|
|
|
|
COMMERICAL |
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Single House |
Mobile Home |
Store |
|
|
|
|
Office |
|
|
|
||||||||||||||
UTILITY POLE# |
SUBDIVISION/DEVELOPMENT |
|
TOWNSHIP/MUNICIPALITY/WARD# |
|
Apartment |
Modular Home |
Industrial |
|
|
|
|
Warehouse |
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Duplex |
Town House |
Restaurant |
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Other _____________________________ |
Other _____________________________ |
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Area of Building _______________________ Sq. Ft. |
|
|
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
* |
If Applicable |
|
|
|
|
|
|
|
|
|
SERVICE CHARACTERISTICS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
** |
Please use this address when applying for underwriter’s inspection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHASE |
|
VOLTS |
|
WIRES |
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Underground |
|
|
Aerial |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
CUSTOMERS BILLING ADDRESS |
|
|
PECO ENERGY ACCOUNT# |
|
|
|
|
|
|
|
|
|
|
3 |
|
|
240 |
|
3 |
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
AMPS _________ |
|
|
|
|
3 |
|
|
120/240 |
|
4 |
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PHASE |
|
VOLTS |
|
WIRES |
|
|
|
|
|
3 |
|
|
120/208 |
|
4 |
|
|
|||||
CITY, STATE |
|
ZIP CODE |
|
TELE. # |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
120 |
|
|
2 |
|
|
|
|
|
3 |
|
|
277/480 |
|
4 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
120/240 |
|
3 |
|
|
|
|
|
3 |
|
|
13200 |
|
3 or 4 |
|
||||||
SEND REPLY TO: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
|
120/240 |
|
5 |
|
|
|
|
|
3 |
|
|
33000 |
|
3 or 4 |
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
ELECTRICIAN’S OR BUILDER’S NAME |
|
|
|
|
|
|
|
METER INFO: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Two Meters, Commercial (General/Totalizer) |
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Single Meter Required |
|
|
|
|
|
Multiple Meter Total No. _____________ |
||||||||||||||||||
ADDRESS |
|
|
|
|
Reply Requested by: |
|
|
|
HEATING/AIR CONDITIONING: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
/ |
/ |
|
|
Central Air _____ Tons |
|
Resistance |
|
|
|
|
|
Heat Pump _____ Tons |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
Natural Gas |
|
|
|
Propane |
|
|
|
|
|
|
Type |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Other ________________ |
|||||||
CITY, STATE |
|
|
|
|
ZIP CODE |
|
|
|
CHARACTERISTICS OF NEW OR ADDITIONAL LOAD: |
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CONNECTED |
|
PECO ENERGY USE ONLY (DEMAND) |
|||||||||||||||||
TELE. # |
|
|
|
|
|
|
|
|
|
TYPE |
|
LOAD (kW) |
|
SUMMER (kW) |
|
Winter (kW) |
|
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
LIGHTING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
CURRENT CONSUTRCTION STATUS: |
|
|
|
|
|
|
|
HEATING |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
Not Started – Date Customer Will Start Work: _____/_____/_____ In Progress Completed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
AIR/COND. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Approximate Date Service Requested: _____/_____/_____ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
TANKLESS WATER HTR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MISC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
CUSTOMER COMMENTS/ DESCIPTION OF WORK: |
|
|
|
TOTAL |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Include single line diagram and substation arrangement if appropriate. |
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
LARGEST MOTOR SPECIFICATIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
QUANTITY |
|
|
|
|
|
|
|
|
|
|
|
|
|
TOTALIZER LOAD |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
SIZE (HP) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
LOCKED ROTOR CURRENT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KW |
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
MOTOR CODE LETTER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
SUBMITTED BY: _________________________________ DATE: ______________________ |
|
|
PHASE |
|
|
|
|
|
|
|
|
|
|
|
|
|
GENERAL LOAD |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
VOLTAGE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
PECO
Application for Electric Service & Meter
Enclosures: Site Plans Single Line Diagram Substation Arrangement
FREQ. OF STARTING (PER HR.)
PURPOSE
KW
INFORMATION BELOW WILL BE FILLED IN BY PECO: |
|
|
|
|
|
|
|
|
|
|
|
Service Request No. |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
BUS/MAJ ACCT REP |
|
TELEPHONE |
|
DATA RECEIVED |
DESIGNER |
|
|
|
|
|
|
DATA RECEIVED |
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TELEPHONE |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
POL SUB |
|
RATE |
|
RIDER |
|
CONTRACT LIMITS |
|
SIC NUMBER |
|
|
T NUMBER |
|
DATE REPLY |
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COMPLETED |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
AMPS |
|
WIRES |
|
VOLTAGE |
PHASE |
|
CIRCUIT |
|
|
|
|
|
|
LOAD (KVA) |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SUMMER_____WINTER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
____ |
|
SERVICE CHARACTERISITICS – Select One from Each |
|
|
|
|
|
|
|
|
|
POLE # / MH # LOCATION |
|
|
CUT THROUGH DATE |
|||||||||||
SERVICE TYPE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Aerial |
|
|
|
Underground |
|
URD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
RATE: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Residential |
|
|
Comm |
Comm (Demand) |
|
HT/PD |
|
|
|
|
|
|
|
|
|
|
|
|
||||||
GENERATION PROCUREMENT CLASS: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
Class 1 (Residential) |
|
|
|
Class 2 (Commercial, less than 100kW) |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
Class 3 (Commercial, 100kW to 500kW) |
|
Class 4 (Commercial, greater than 500kW) |
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
NOTE: The customer’s Initial Procurement Class will be determined by PECO, based on peak load estimates for |
|
|
|
|
|
|
|
|
|
|
||||||||||||||
the first year of service. The customer’s Procurement Class will be adjusted each year, based on actual usage. |
|
|
|
|
|
|
|
|
|
|
||||||||||||||
METER TYPE: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
KWH |
|
|
IND. DEMAND |
|
RECORDER |
TOU |
|
|
|
|
|
|
|
|
|
|
|
|
||||||
SERVICE PHASING: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
SINGLE PHASE |
TWO PHASE |
|
THREE PHASE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
SERVICE REQUIREMENTS: |
|
|
|
|
|
|
METERING LOCATION AND REQUIREMENTS: |
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
Present Location: |
Meter # _______________ |
|
CTs- ________ |
|
||||||||||
Present Service OK |
Loop Only |
|
|
|
|
|
Indoor Outdoor |
On ________ |
Wall, ________ Ft. From ________ Wall, ________ ft. Above Ground |
|||||||||||||||
Taps Only |
|
|
See Job # _________________________________ |
|
||||||||||||||||||||
ADVANCE NOTIFICATIONS: |
|
|
|
|
|
|
|
|
|
|
|
CUSTOMER BILLING: |
|
|
|
|
|
|
|
|||||
Underwriter’s Cert. Required |
|
Yes |
No |
|
|
|
|
|
|
|
Advance Billing Required Yes |
|
|
$_________________ |
||||||||||
Customer to Trench |
|
Yes |
No |
|
|
|
|
|
|
|
|
|
|
|
|
No Customer Charges: $_________________ |
||||||||
Permit Required |
|
|
|
Yes |
No |
State |
Other _______________________ |
Cust. # _________________________ |
Date ___________________________ |
|||||||||||||||
ACT 222 Cert. Required |
|
Yes # _____________ |
No |
N/A |
|
|
|
|
BTCO # ________________________ |
Date ___________________________ |
||||||||||||||
PA One Call # ___________________________ |
|
|
Date __________________________ |
CATV # ________________________ |
Date ___________________________ |
|||||||||||||||||||
Gas |
BTCO |
CATV |
Other ___________________ |
Date __________________________ |
Other __________________________ |
Date ___________________________ |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SKETCH / INSTRUCTIONS
Form Characteristics
| Fact Name | Fact Description |
|---|---|
| Application Requirement | The Peco Service and Meter Application requires the submission of a completed form which includes personal identification, service request type, and construction status. |
| Governing Law | Compliance with Pennsylvania Public Utility Commission regulations is necessary when filing this application for electric service. |
| Inspection Necessity | All work must be inspected by an approved inspection agency before service can commence, ensuring safety and regulatory compliance. |
| Deadline for Communication | If the customer does not respond within 90 days after PECO's initial communication, the application may be cancelled automatically. |
Guidelines on Utilizing Peco Service And Meter Application
Filling out the PECO Service and Meter Application is an important step for obtaining electrical service. This guide will help ensure that every section is completed accurately, which can speed up the processing time significantly. To make the process easier, follow these straightforward steps to fill out the form correctly.
- Start by reading the instructions at the top of the application.
- Locate your PECO regional office and check the appropriate box for where the application will be sent.
- Fill in the fields for the customer's name and service location. Don't forget to include your Driver’s License Number or Social Security Number.
- If applicable, include the PECO Energy pole number or Lot number.
- Provide the billing address or account number from your last 60 days with PECO.
- Complete the fields about the electrician or contractor. Fill in their Tax Identification Number and specify where to send the reply.
- Mark your current construction status and include the date you need the service.
- Indicate the type of request and service specifics. Input the number of units and the area per unit, as well as the service characteristics.
- Complete the table regarding load characteristics, specifying connected KW, maximum summer KW demand, and maximum winter KW demand.
- Provide motor specifications, if required, in the relevant section.
- If using compensated metering, indicate the totalizer and general load (KW).
- Add any additional comments that may be necessary.
- Finally, be sure to sign and date the application to complete it.
Once the application has been filled out, you can submit it to the appropriate PECO office. Properly completing each section minimizes delays and helps ensure you receive the necessary services in a timely manner.
What You Should Know About This Form
What is the purpose of the Peco Service and Meter Application form?
The Peco Service and Meter Application form is designed for customers who need to request electric service from PECO. Whether you're initiating new service, relocating existing service, or requesting changes, this form captures all necessary details to ensure your request is processed efficiently. Complete and accurate information helps avoid delays in service installation or adjustments.
What information do I need to provide when completing the application?
Your application will require essential details such as your name, service location, and the specific type of request—whether it’s a new service, load increase, or service relocation. You must include your Driver's License Number or Social Security Number, as well as your billing address and any relevant construction details. It's also necessary to specify service characteristics and any additional comments related to your request.
Where should I submit the completed application form?
Submit the completed application form to the appropriate PECO regional office based on your service location. A checklist is usually provided in the application to help you identify the correct office. You can send your form via mail or fax; make sure to keep a copy for your records. The specific contact information for each regional office is also included on the application.
What happens if I don’t provide all the required information on the application?
If you fail to provide complete information, it may lead to delays in processing your application. Incomplete applications can result in processing hold-ups, and you may need to resubmit your request. Always double-check your entries before submission to minimize issues.
How will I know if my application has been processed?
After submitting your application, you can expect a response from PECO within a specified timeframe. If you indicated where you want the reply sent on the application, you will receive communication there. If no further communication has been received within 90 days, be proactive and follow up with the PECO customer service.
Common mistakes
Completing the PECO Service and Meter Application can seem straightforward, but many applicants make common mistakes that can delay their service. One frequent mistake is not including the required customer information. When filling out the fields for the customer's name and service location, it is essential to provide not just your name but also either your driver's license number or your Social Security number. Omitting this information can result in the rejection of the application.
Another mistake often observed is the failure to specify the type of service requested clearly. Applicants must choose from specific options such as "New Service" or "Load Increase." Using vague terms like "immediate service needed" can cause confusion and lead to processing delays. Always be clear and direct about the type of service you are requesting, along with the units involved.
According to the instructions, not indicating the current construction status is a significant oversight that many applicants make. The form requires you to select whether your project is 'Not Started,' 'In Progress,' or 'Completed.' Additionally, including specific dates for when service is requested is crucial for timely processing. This information helps PECO prioritize and schedule service effectively.
Lastly, many individuals overlook the importance of signing and dating the application. The application is not valid without a signature, as this indicates acknowledgment of the information provided. Ensure that this last step is not forgotten to avoid unnecessary delays in the processing of your electric service request.
Documents used along the form
When applying for electric service through the PECO Service and Meter Application form, several additional documents may be necessary. Each of these documents serves a specific purpose in ensuring that your application is processed accurately and efficiently.
- Site Plans: These detailed drawings show the layout of the installation site. They include details about the location of buildings, structures, and relevant infrastructure. This helps PECO assess any potential issues related to service installation.
- Single Line Diagram: A visual representation of the electrical system. It shows how power flows from the source to different loads, ensuring that all components are accounted for and correctly designed.
- Substation Arrangement: This document outlines how the electrical service connects to the existing network. It's essential when there are complex connections or requirements related to the substation.
- Credit Application and Agreement: Required if the customer has not had PECO service in the past 60 days. This form assesses the creditworthiness and establishes the terms of service.
- Inspection Certificates: These documents, often required from city or private inspectors, show that the electrical installation complies with local codes and regulations. Compliance is critical for safety and reliability.
- Contractor Information: When using a contractor for your electrical work, their details, including contact information and licensing, may be necessary to ensure the work meets all regulatory standards.
- Utility Pole Location Confirmation: If the installation requires or affects utility poles, a confirmation of their location may be necessary to avoid conflicts with existing infrastructure.
- Load Characteristics Table: A detailed form providing information about expected electrical loads. This can influence the type of service and equipment needed.
- Heating and Air Conditioning Information: Detailing HVAC expectations helps PECO understand the service requirements better, ensuring adequate power supply for climate control systems.
Providing these documents along with your application can help avoid delays and streamline the service setup process. Always ensure that all forms and attachments are complete and accurate to facilitate a smoother application experience.
Similar forms
The PECO Service and Meter Application form shares similarities with other documents in various utility and service applications. Here are eight documents that are comparable:
- Water Service Application: Similar in that both require personal information, service location details, and the type of service requested.
- Natural Gas Service Application: Like the PECO form, it asks for customer identification, site specifics, and applicable characteristics of the service.
- Construction Permit Application: Both documents require clear descriptions of the project and may involve compliance with local codes.
- Business License Application: They share similar needs for identifying information, business details, and types of requested services or upgrades.
- Electric Meter Installation Request: This document also collects information on service type and load characteristics, similar to the PECO application.
- Utility Relocation Request: Request forms for relocating utilities typically ask for similar details like location and type of service, reflecting shared objectives.
- Renewable Energy Interconnection Application: This application requires information on service capacity, which mirrors the request for load details in the PECO form.
- Temporary Service Request Form: The requirements to describe the service and provide personal and property information align closely with the PECO application.
Dos and Don'ts
Things to Do:
- Read the instructions carefully before starting the application.
- Locate the appropriate PECO regional office for your application and check the correct box.
- Ensure your name and service location fields are complete, including your Driver's License or Social Security Number.
- Complete the section regarding your electrician or contractor and include their Tax Identification number.
- Clearly state your current construction status and specify a service request date without using vague terms.
- Sign and date the application to validate it before submission.
Things to Avoid:
- Do not leave any required fields empty, as this could delay processing.
- Avoid using phrases like "as soon as possible" to specify your service request date.
- Don’t forget to include any additional comments or details that may provide clarity.
- Do not neglect to provide any relevant documentation, like site plans or diagrams, if needed.
- Avoid mailing the application without checking it for errors or missing information first.
- Do not disregard the requirement for a credit application if you haven’t had PECO service in the last 60 days.
Misconceptions
Many misconceptions surround the PECO Service and Meter Application form. Understanding these inaccuracies can significantly simplify the application process. Below are some common misconceptions and clarifications related to this form:
- Misconception 1: The application form can be submitted without a complete set of information.
- Misconception 2: Only homeowners need to fill out this application.
- Misconception 3: Previous customers do not need to provide their PECO account number if they’re applying for a new service.
- Misconception 4: Any location can receive the same voltage and service.
- Misconception 5: The application does not need to be signed or dated.
- Misconception 6: Submitting the application guarantees immediate service upon completion.
This is incorrect. Incomplete applications can delay processing. Every section must be thoroughly filled out to ensure timely service.
This is misleading. Contractors and electricians must also complete the form, especially when they are requesting service on behalf of a client.
This is not accurate. If a customer has not had service within the last 60 days, they must complete a credit application and agreement, which may require their previous account information.
This assumption is false. Not all service voltages are available in every area, and customers should verify availability before proceeding with any electrical equipment purchases.
This is a crucial misunderstanding. The form must be signed and dated as an acknowledgment of the information provided and the agreement to their terms.
This is not necessarily the case. PECO reserves the right to cancel the request if no further communication is received within 90 days of their response date, so follow-up is essential.
Key takeaways
Here are some key takeaways for filling out and using the PECO Service and Meter Application form:
- Review Instructions: Carefully read the instructions at the top before filling out the form.
- Regional Office: Identify the appropriate PECO regional office and send the completed application there.
- Customer Information: Provide your name and service location, and include your Driver's License or Social Security Number.
- Service Address: Use the address of where the service will be applied, especially for underwriter’s inspection applications.
- Electrician/Builder Details: Fill in the electrician or contractor’s information and specify the desired date for a response.
- Construction Status: Clearly indicate your current construction status and avoid vague terms like "as soon as possible."
- Load Characteristics: Be detailed about load characteristics, providing required KW and demand metrics for both summer and winter.
- Motor Specifications: If applicable, accurately fill in the motor information section related to load size and current.
- Additional Comments: Use the comments section to provide any extra details that may assist PECO in processing your application.
- Signature Required: Ensure the application is signed and dated; incomplete applications may cause delays.
Filling out this form accurately and comprehensively will help ensure a smooth application process. Be proactive in providing all necessary details to avoid processing delays.
Browse Other Templates
Audit List - Details patients' current medications and prior illnesses.
What Is a 540 Form - It's important for taxpayers to report their California adjusted gross income clearly to ensure accurate tax calculations.
Ihss Live Scan - Completing the LIC 9163 correctly can help minimize return trips and processing delays.